在铝板的生产加工过程中，会产生大量的废铝，通常是残块或修边后的边角料。此类材料应如何处理？下面就让铝板厂家来讲解一下废铝板是怎么处理的。
　　In the process of production and processing of aluminum plate, there will be a large amount of waste aluminum, which is usually the remnant or the leftover material after trimming. How should such materials be handled? Let the aluminum plate manufacturer explain how to deal with the waste aluminum plate.
　　通常边角料或存根的边角料是铝块，形状规则，里面没有杂质。几乎每个铝加工企业都将这种废铝和铝锭混合在一起，重新熔炼后再生产，可以适当降低企业的产量，而这种废料实际上可以说与铝锭具有相同的性能。
　　Usually the scraps or stubs are aluminum blocks with regular shapes and no impurities in them. Almost every aluminum processing company mixes this waste aluminum with aluminum ingots, remelts them and produces them again, which can reduce the output of the company, and this waste can actually be said to have the same properties as aluminum ingots.
　　由于内部没有混入其他物质，还有一种铝板在生产后发现有质量问题。这种铝板不允许出厂直接放入铝锭车间重新加热。但这种废铝回收必须保证牌号和材质一致，否则生产出来的产品化学成分不合格。
　　Another type of aluminum was found to have quality problems after production because it was not mixed with other materials. This type of aluminum plate is not allowed to be put directly into the aluminum ingot plant for reheating. But this kind of waste aluminum recycling must ensure the same brand and material, otherwise the chemical composition of the product produced is not qualified.
　　如果是锯切产生的废料，也就是我们通常说的铝屑，就会掺入一定量的沙子或其他物质。原则上只能加工废铝，不能回收利用。会导致这批产品出现问题，得不偿失。
　　If it's sawing waste, which is what we call aluminum chips, there's a certain amount of sand or other material mixed in. In principle, only waste aluminum can be processed, not recycled. This batch of products will lead to problems, not worth the loss.

　　铝屑的回收应注意以下几点：加工一定材质等级的工件时，应及时收集，防止铝屑混入。回收时，应将参与切削的各种机床底盘中的铝屑清理干净。回收的废铝应按等级严格分类，放置在堆场规定的隔间内，并标明废铝的种类和等级。，有条件时应及时进行重熔，避免混号。应避免杂物、纱线、棉纱等杂物混入铝屑中。
　　The recycling of aluminum scraps should pay attention to the following points: when processing workpiece of a certain material grade, it should be collected in time to prevent aluminum scraps from mixing. When recycling, the aluminum chips in the chassis of various machine tools should be cleaned up. The recycled waste aluminum shall be classified strictly according to grade, placed in the specified compartment of the yard, and marked with the type and grade of waste aluminum. , if conditions are available, remelting should be carried out in time to avoid mixing. Sundries, yarns, cotton yarns and other sundries mixed with aluminum shavings should be avoided.
　　如果得到废铝的处理，将降低生产成本，提高生产效率。但是，如果生产中的废铝处理方法不当，不仅不会减少企业的浪费，反而会导致经济损失，所以废铝处理要十分严谨，了解更多就来http://www.jndclyyxgs.com咨询吧！
　　If the waste aluminum is treated, the production cost will be reduced and the production efficiency will be improved. However, if the production of aluminium scrap processing method is undeserved, not only will not reduce the waste of the enterprise, it will lead to economic losses, so be very rigorous, aluminium scrap processing more to http://www.jndclyyxgs.com consultation!