铝卷厂家生产铝卷之后，要对成品进行检验，这是板材生产出货前的一道工序。那么铝卷在出货前的质量检验有什么方法？这个问题值得大家来了解了解。
　　Aluminum coil manufacturers after the production of aluminum coil, to test the finished product, this is a process before the production and shipment of plate. So what is the method of quality inspection of aluminum coil before shipment? This is a question worth exploring.
　　在经过大量的加工过程后，不可避免地会产生各种缺陷和废品。因此，按照相关标准来检测板材的尺寸精度和表面质量。超出标准规定的尺寸偏差对成品板材表面应进行光洁处理，边缘不得有毛刺、裂纹、折角、磕碰等现象。表面缺陷须符合标准规定，须符合相关标准或技术条件的规定，并且光洁、无擦伤、划伤等。
　　After a large number of processing process, it will inevitably produce various defects and waste products. Therefore, in accordance with the relevant standards to detect the size of the sheet and surface quality. Beyond the standard size deviation of the finished plate surface should be smooth processing, the edge shall not have burr, crack, fold Angle, knock against and other phenomena. The surface defects shall meet the standards, the relevant standards or technical conditions, and be smooth, free from scratches, scratches, etc.
　　平直度检验钢板表面质量的方法是将受检钢板放置在检验平台上，用肉眼检查钢板表面是否有超出标准规定的缺陷，再检查板材与平台之间的间隙，不超过标准规定范围的，即为合格成品。将合格的板材一端头打上合号、状态代号、厚度、批号、顺序号和合格检印等。
　　The method of flatness inspection of surface quality of steel plate is to place the inspected steel plate on the inspection platform, check whether the surface of the steel plate has defects beyond the standard with the naked eye, and then check the gap between the plate and the platform. If it does not exceed the standard, it is qualified finished product. Alloy number, status code, thickness, batch number, serial number and qualified check mark shall be marked on one end of the qualified plate.

　　铝卷生产厂家认为为检验成品板的机械性能、内部组织、工艺性能等，须按照标准和工艺规定的项目，对每一批次的产品进行切割试验，以保证板材的质量符合产品标准，满足用户的使用要求。
　　Aluminum coil manufacturers think that in order to test the mechanical properties, internal organization, process performance of the finished plate, it is necessary to carry out cutting test on each batch of products in accordance with the standards and process requirements, so as to ensure that the quality of the plate meets the product standards and meet the requirements of users.
　　对重要产品的机械性能进行测试。如果在机械性能测试中发现一种样品不合格，则对该不合格样品的板材进行二次重复试验。若再试样中仍有一件不合格，则报废。供方可逐张复验不合格样品所代表的一段板材。交货合格，不合格者视为无效。
　　Test mechanical properties of important products. If a sample is found to be unqualified during the mechanical property test, a second repeat test is carried out on the plate of the unqualified sample. If there is still one unqualified sample, it will be scrapped. The supplier may retest one sheet at a time the section represented by the nonconforming sample. Unqualified delivery shall be deemed invalid.
　　按照国家标准、行业标准、企业标准、技术条件、技术规程等规定，对产品的表面、机械性能等进行全面检查验收，确保向用户提供优质铝卷产品。更多内容就来网站www.jndclyyxgs.com咨询吧！
　　In accordance with national standards, industrial standards, enterprise standards, technical conditions, technical regulations and other provisions, we carry out a comprehensive inspection and acceptance of the surface and mechanical properties of the products to ensure that we provide users with high-quality aluminum coil products. More content to the website www.jndclyyxgs.com consultation!