修边包装线是花纹铝板生产过程的一个道工序，铝板生产厂家为您讲解下其工艺流程具体内容。
The trimming and packaging line is a process in the production process of patterned aluminum plate, and the aluminum plate manufacturer will explain the specific content of its process flow for you.
1、定位:按花纹铝板需要裁切尺寸，调整好定位装置，合理确定各边修边量。
1. Positioning: according to the cutting size of figured aluminum plate, adjust the positioning device and reasonably determine the trimming amount of each side.
2、裁切:先将花纹铝板置于纵切机上裁切长边，然后再进入横切裁切短边。
2. Cutting: first place the figured aluminum plate on the slitter to cut the long side, then enter the cross cutting to cut the short side.
3、清扫:裁切完毕后，操作员用毛刷将板面清扫干净，花纹铝板堆放整齐。
3. Cleaning: After cutting, the operator shall clean the board surface with a brush, and the patterned aluminum plates shall be stacked neatly.

4、送到发运处:用叉车将花纹铝板送到了至发运处，进行印字包装。
4. Send to the shipping place: use a forklift to send the figured aluminum plates to the shipping place for printing and packaging.
5、贴标识:按工艺要求在成品板右下角粘贴产品合格证，品质保证和产品色标等标识。
5. Labeling: according to the process requirements, the product certificate, quality assurance, product color code and other identifications shall be pasted at the lower right corner of the finished board.
6、入库:用叉车将成品板送入指定位置，并填写产品入库登记卡。
6. Warehousing: use a forklift to send the finished boards to the designated location, and fill in the product warehousing registration card.
花纹铝板的修边包装线工艺流程就从6个步骤了解起来，您有什么问题可以随时来我们这里http://www.jndclyyxgs.com咨询！
The process flow of the edging and packaging line of patterned aluminum plate can be learned from six steps. If you have any questions, you can come to us at any time http://www.jndclyyxgs.com consulting service