According to customer requirements, a thickness of 0.5 can be transported through drum packaging? 4.5mm aluminum strip coil, or aluminum strip coil with a thickness of 0.6mm or less in a hard state. When using this method, first immerse a layer of aluminum strip, then wrap it with kraft paper and a layer of plastic cloth, insert the cloth head into the tube, and then use the iron waist to form a triangle in the axial direction. Tighten it with two iron waists in the circumferential direction. Then firmly fix the aluminum roller. Place it in a serrated packaging rack and secure it. The logo of the aluminum coil should be written on the aluminum coil or label, and should indicate the same content and precautions as the above method.

压花铝板可生产1系列，3系列，5系列和6系列铝合金产品，包括1,060压纹铝板，3003压纹铝板，5052压纹铝板和6061压纹铝板。 产品种类繁多，可以满足不同客户的需求。 所有系列的压纹铝板均具有良好的耐腐蚀性，出色的焊接性能，高强度，良好的可成型性以及易于加工的特点。 该公司具有快速的线淬火功能，不仅可以确保产品质量，还可以提高装饰铝板的加工性能。 由有图案的铝板制成的楼梯不仅具有防滑功能，而且还具有防腐蚀和防腐蚀功能。

Embossed aluminum plates can produce 1 series, 3 series, 5 series, and 6 series aluminum alloy products, including 1060 embossed aluminum plates, 3003 embossed aluminum plates, 5052 embossed aluminum plates, and 6061 embossed aluminum plates. There are a wide variety of products that can meet the needs of different customers. All series of embossed aluminum plates have good corrosion resistance, excellent welding performance, high strength, good formability, and easy processing characteristics. The company has a fast line quenching function, which not only ensures product quality but also improves the processing performance of decorative aluminum plates. The stairs made of patterned aluminum plates not only have anti slip function, but also have anti-corrosion and anti-corrosion functions.

对于压花铝板的状态，我们根据全硬，半硬和软状态对其进行区分。 正常的软态主要是指铝板的O态，全硬的弯曲效果基本上不好。 在铝板的状态下，通常H18，H19，H38等都是完全硬的，处于半硬状态的铝板基本上可以折叠，而H24是半硬的。

For the state of embossed aluminum plates, we distinguish them based on their fully hard, semi hard, and soft states. The normal soft state mainly refers to the O state of the aluminum plate, and the bending effect of fully hard is basically not good. In the state of aluminum plates, H18, H19, H38, etc. are usually completely hard. Aluminum plates in a semi hard state can basically be folded, while H24 is semi hard.

通常在O状态下弯曲是没有问题的，但是由于在这种状态下的铝板太软，我们通常很少使用在这种状态下的铝板弯曲。 同时，在选择铝板时，还应注意纯铝板与合金铝板的区别。 通常，纯铝的硬度不太高。 具体地，对于纯铝弯曲，可以使用1100、1050、1060等。 建议使用1100H26。

Usually, bending in the O state is not a problem, but due to the softness of the aluminum plate in this state, we usually rarely use aluminum plate bending in this state. At the same time, when selecting aluminum plates, attention should also be paid to the difference between pure aluminum plates and alloy aluminum plates. Usually, the hardness of pure aluminum is not very high. Specifically, for pure aluminum bending, 1100, 1050, 1060, etc. can be used. It is recommended to use 1100H26.

铝合金板的硬度会更好。 通常，铝板（例如3003、3005和5052）可用于弯曲。 如果6061、2024、7075的硬度过高，尤其是在T6状态下，则不应弯曲，除非先加热然后折叠，否则好铝板和差铝板的区别在于氧化性能，耐受性， 表面效果，晶体精度在均匀性和稳定性方面存在差异。 弯曲效果没有太大不同。 如果对铝板表面进行了喷漆，则建议不要将其质量过高。 您可以考虑使用3003-H26、3005H24或5052H34。

The hardness of aluminum alloy plates will be better. Typically, aluminum plates (such as 3003, 3005, and 5052) can be used for bending. If the hardness of 6061, 2024, and 7075 is too high, especially in the T6 state, they should not be bent unless heated first and then folded. Otherwise, the difference between good and poor aluminum plates lies in their oxidation performance, tolerance, surface effect, crystal accuracy, uniformity, and stability. The bending effect is not much different. If the surface of the aluminum plate is painted, it is recommended not to have its quality too high. You can consider using 3003-H26, 3005H24, or 5052H34.