1、实验室天花采用防尘，光滑，耐燃，钢板夹心的彩钢板，两边用槽型铝封边，彩钢板与彩钢板之间用中性瓷白玻璃胶密封；
1. The laboratory ceiling is made of dust-proof, smooth, fire-resistant, and steel plate sandwich color steel plates. Both sides are sealed with slot shaped aluminum, and the color steel plates are sealed with neutral porcelain white glass adhesive between them;
2、实验室净化区地面铺贴专用PVC地板胶，防火等级为B1级，防酸、防碱、防腐蚀耐磨达到国家标准实验室要求等级。
2. The floor of the laboratory purification area is paved with dedicated PVC floor adhesive, with a fire resistance rating of B1, and meets the national standard laboratory requirements for acid, alkali, corrosion, and wear resistance.
3、实验室墙体为采用防尘，光滑，耐燃，钢板夹心的彩钢板墙体固定采用50×30槽型铝做地槽，地槽固定采用钢钉加木块固定。
3. The laboratory wall is made of dust-proof, smooth, fire-resistant, and steel plate sandwich color steel plate fixed with 50 × 30 slot aluminum is used as the floor trough, and the trough is fixed with steel nails and wooden blocks.
4、地面与墙面，墙面与墙面，墙面与天花板交接均采用半径50mm的铝合金圆弧处理。
4. The connection between the ground and the wall, between the wall and the wall, and between the wall and ceiling is treated with an aluminum alloy arc with a radius of 50mm.
5、彩钢板与彩钢板之间用中性瓷白玻璃胶密封，防止有缝滋生细菌。
5. The neutral porcelain white glass adhesive is used to seal the gap between the color steel plate and the color steel plate to prevent bacterial growth.
6、柱面、阴阳角处理：钢板夹芯彩钢板隔断之间阳角处装铝合金外圆弧，隔断与隔断之间，隔断与天花之间，隔断与地面之间的阴角封R50铝合金内圆弧。圆角线三维汇交处安装铝合金顶球片，门口断开处应收口，阳角柱与天花之交角。
6. Column surface and internal and external corner treatment: Install aluminum alloy outer arc at the external corner between steel plate sandwich color steel plate partitions, seal R50 aluminum alloy inner arc between partitions, between partitions and ceiling, and between partitions and ground. Install aluminum alloy top ball pieces at the three-dimensional intersection of the rounded corner line, and close the opening at the broken entrance. The intersection angle between the external corner column and the ceiling.
7、门窗：实验室统一采用洁净密封彩钢钢板门，门套为5cm宽1.2厚沙光铝合金制作，门板上为5厘钢化玻璃窗，下部分为彩钢板填充。具体按照甲方要求，可开为900×2000mm、1500×2100等，实验室统一采用洁净密封彩钢钢板窗，1M以下为彩钢板，1M以上为1.Om高的5mm的钢化玻璃规格为：1500×1000、1000×1000 安全门为：1200*2100落地玻璃门。以上为标准配置。
7. Doors and windows: The laboratory adopts clean and sealed color steel plate doors, with a door pocket made of 5cm wide and 1.2 thick sanded aluminum alloy. The upper part of the door panel is a 5cm tempered glass window, and the lower part is filled with color steel plates. According to the specific requirements of Party A, it can be opened at 900 × 2000mm, 1500 × 2100, etc., the laboratory uniformly uses clean and sealed color steel plate windows, with color steel plates below 1M and tempered glass with a height of 5mm above 1M. The specification is: 1500 × 1000, 1000 × 1000 safety doors are: 1200 * 2100 floor glass doors. The above are standard configurations.
This article is dedicated to the purification and decoration of PCR laboratories. For more information, please click on: http://www.jnyhrs.com Sincere attitude. We will provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Stay tuned
