当前位置:首页-新闻资讯

使用铝箔时要注意哪些事项?

来源:http://www.jndclyyxgs.com/ 发布时间:2023-07-10

在使用之前,要将材料表面清理干净,将浮灰和污渍去掉。如果使用铝箔作为容器时,在加热中,要运用不逾越3公分厚的铝箔做容器。容器要进行填满,不能接触其它金属部位,铝箔容器应和其它铝箔容器保持2公分的距离,在使用之前,如果容器有损坏,要及时更换,不要重复使用。
Before use, clean the surface of the material and remove any floating dust and stains. If aluminum foil is used as a container, it is necessary to use aluminum foil that does not exceed a thickness of 3 centimeters during heating. The container should be filled and should not come into contact with other metal parts. Aluminum foil containers should be kept at a distance of 2 centimeters from other aluminum foil containers. Before use, if the container is damaged, it should be replaced in a timely manner and not reused.
当铝箔作为胶带时,要在使用铝箔胶带之前将需要使用铝箔胶带的电子产品清理干净,并用干净的干抹布或者干毛刷将浮沉去掉。因铝箔胶带纯度高,能消除电磁干扰,隔离电磁波对人体的伤害,避免不需要电压与电流而影响功能。铝箔胶带的类型,规格要根据使用需要和具体条件,合理选取。输送带接头要采用热硫化胶接,以提高可靠性,保持较高的有效强度。在黏贴前,一定要确定好需要连接的位置,否则粘歪了再重新撕下来就比较麻烦。黏贴好之后要用手指在铝箔胶带上反复压几次,让胶层充分发挥作用。输送机的传送辊简直径与传送带的小带轮直径应符合有关规定。铝箔胶带的材质为多元酯纤维,在重复使用或多次弯折后皆不易发生裂痕及损伤。不可以使铝箔胶带蛇行或蠕行,要保持拖辊,立辊灵活,张紧力要适度。
铝卷生产厂家
When using aluminum foil as adhesive tape, clean the electronic products that require aluminum foil tape before using it, and use a clean dry cloth or brush to remove the float and sink. Due to the high purity of aluminum foil tape, it can eliminate electromagnetic interference, isolate electromagnetic waves from harm to the human body, and avoid affecting functionality without the need for voltage and current. The type and specifications of aluminum foil tape should be reasonably selected based on usage needs and specific conditions. The conveyor belt joints should be bonded with hot vulcanized adhesive to improve reliability and maintain high effective strength. Before pasting, it is important to determine the position where the connection needs to be made, otherwise it will be more troublesome to tear it off again if the adhesive is crooked. After pasting, use your fingers to repeatedly press the aluminum foil tape several times to fully utilize the adhesive layer. The diameter of the conveyor roller and the small pulley of the conveyor belt should comply with relevant regulations. The material of aluminum foil tape is polyester fiber, which is not prone to cracking and damage after repeated use or multiple bending. It is not allowed to cause the aluminum foil tape to snake or creep, but to maintain the flexibility of the drag roller and the vertical roller, and the tension should be moderate.
当铝箔作为隔热服使用时,使用前,目测检视防护服以确保所有装备处于良好状态,干净并且没有破损,如果有破损等问题,禁止使用。铝箔隔热服的面屏要处于良好状态且玻璃处于正确位置。如果隔热服内部温度过高,应立即离开工作区域进入安全地带,打开防护服以快速降低温度。铝箔隔热服的存放应放在阴凉干燥处,不要折叠,以免防护服出现折痕,影响使用。
When using aluminum foil as insulation clothing, visually inspect the protective clothing before use to ensure that all equipment is in good condition, clean, and undamaged. If there are any issues such as damage, use is prohibited. The surface screen of the aluminum foil insulation suit should be in good condition and the glass should be in the correct position. If the internal temperature of the thermal insulation clothing is too high, immediately leave the work area and enter the Anzen Chitai. Open the protective clothing to quickly reduce the temperature. Aluminum foil insulation clothing should be stored in a cool and dry place, and should not be folded to avoid creases in the protective clothing that may affect its use.
本文由铝卷生产厂家友情奉献.更多有关的知识请点击: http://www.jndclyyxgs.com真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.
This article is a friendly contribution from aluminum coil manufacturers. For more information, please click on: http://www.jndclyyxgs.com Sincere attitude. We will provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Stay tuned