这种拉丝方法是zui传统的拉丝方法，用于平面拉丝，特别适合板材加工，这种拉丝方法是无意磨。研磨产品为无织布拉丝轮或砂带。适用于圆管工件，如手柄等。这样拉丝的线纹通常是短线纹，与工件的旋转速度、研磨产品的旋转速度和研磨产品本身有关。尼龙轮采用机器转速驱动，产品采用人工技术打磨。适用于不规则电镀产品。

This drawing method is a traditional drawing method used for flat drawing, especially suitable for sheet metal processing. This drawing method is unintentional grinding. The grinding product is a non-woven drawing wheel or sand belt. Suitable for circular pipe workpieces, such as handles. The wire drawing lines in this way are usually short lines, which are related to the rotation speed of the workpiece, the rotation speed of the ground product, and the ground product itself. The nylon wheels are driven by machine speed, and the products are polished using manual technology. Suitable for irregular electroplated products.

根据拉丝产生的纹理效果，主要有直纹、乱纹、螺纹、波纹、旋纹等。

According to the texture effects produced by wire drawing, there are mainly straight lines, irregular lines, threads, ripples, spiral lines, etc.

直线拉丝是指通过机械摩擦在铝板等表面加工直线。它具有去除铝板表面划痕和装饰铝板表面的双重作用。包括连续线和间歇线。连续线可通过连续水平直线摩擦铝板等表面获得。改变不锈钢刷的钢丝直径，可以获得不同厚度的线条。间歇线通常在抛光机或抛光机上加工。

Linear drawing refers to the machining of straight lines on surfaces such as aluminum plates through mechanical friction. It has a dual function of removing scratches on the surface of aluminum panels and decorating the surface of aluminum panels. Including continuous lines and intermittent lines. Continuous lines can be obtained by continuously horizontal straight lines rubbing against surfaces such as aluminum plates. By changing the wire diameter of the stainless steel brush, different thicknesses of lines can be obtained. Intermittent lines are usually processed on polishing machines or polishing machines.

在高速运行的铜丝刷下，铝板前后左右移动摩擦获得的无规则、无明显线条的哑光丝。该加工对铝或铝合金板的表面要求较高。

Under the high-speed copper wire brush, the aluminum plate moves back, forth, left, and right to obtain an irregular and indistinct matte wire through friction. This processing requires high surface requirements for aluminum or aluminum alloy plates.

一般来说，它是在抛光机或抛光机上制造的。利用上组磨辊的轴向运动，在铝或铝合金板表面线，也称为旋转光，是一种用圆柱毡或研石尼龙轮安装在钻床上，用煤油混合抛光软膏，旋转抛光铝或铝合金板表面获得的丝线。主要用于圆形标志和小型装饰表盘的装饰加工。

Generally speaking, it is manufactured on a polishing machine or polishing machine. Using the axial movement of the upper group of grinding rollers, a thread, also known as rotary polishing, is obtained on the surface of aluminum or aluminum alloy plates by installing a cylindrical felt or grinding stone nylon wheel on a drilling machine, mixing kerosene with polishing paste, and rotating to polish the surface of aluminum or aluminum alloy plates. Mainly used for decorative processing of circular logos and small decorative dials.

用轴上有圆毡的小电机将其固定在桌面上，与桌面边缘成60度左右的角度。另外，用固定铝板压茶的拖板，在拖板上贴一层边缘齐直的聚酯薄膜，限制螺纹的竞争力。利用毛毡的旋转和拖板的直线移动，在铝板表面擦拭相同宽度的螺纹。

Fix it on the desktop with a small motor with a circular felt on the shaft, at an angle of about 60 degrees from the edge of the desktop. In addition, use a fixed aluminum plate to press tea on the drag plate, and apply a layer of polyester film with straight edges on the drag plate to limit the competitiveness of the threads. Using the rotation of the felt and the linear movement of the drag plate, wipe the same width of threads on the surface of the aluminum plate.