来源:http://www.jndclyyxgs.com/ 发布时间:2018-04-25
1、构造新颖
1. The new structure is novel
2、自重轻耐久性此种铝板质轻,每平方米质量约7kg左右,其抗拉强度达200N/mm2;铝板延伸度高,相对延伸率高于10%,能承受高度弯曲而不破裂,韧性良好。
2. The weight of self weight and light durability is light, the quality of each square meter is about 7kg, its tensile strength is 200N / mm2; the elongation of the aluminum plate is high and the relative elongation is higher than 10%. It can withstand high bending without rupture and good toughness.
3、装饰性强区别于国内外其它保温板的构造,直接将低导热率、高保温性能的硬质聚氨酯经灌注发泡牢固粘结在成型铝板背面上。
3, the decoration is strongly different from other thermal insulation boards at home and abroad, and the hard polyurethane with low thermal conductivity and high thermal insulation property is firmly bonded on the back of the molded aluminum plate.
4、涂层耐候性强铝板表面喷涂的是含KYNAR-500达70%的氟碳聚合物树脂,经过这种氟碳喷涂的铝板表面,抗酸雨、抗腐蚀、抗紫外线能力极强,可保证涂层20年以上不褪色、不粉化、不脱落。
4, the coating of weatherproof strong aluminum plate is coated with fluorocarbon polymer containing KYNAR-500 up to 70%. Through this fluorocarbon spraying aluminum surface, the ability of anti acid rain, corrosion resistance and ultraviolet resistance is very strong. It can ensure that the coating is not fading, powderizing and shedding for more than 20 years.
5、安装快捷工艺合理保温铝板在工厂流水线上制成,到工地直接干挂在围护结构上,是一种新型节能装饰一体化的外装材料,且施工方便,工期短。总之聚氨酯硬泡虽然能用明火点燃,但不易燃烧。即使燃烧起来也仅仅是表面焦化而不会被烧毁。
5. The installation of reasonable heat insulation aluminum plate on the factory line, directly hanging to the construction site on the construction site, is a new type of energy-saving decoration integrated high-grade external material, and the construction is convenient and the time limit is short. In conclusion, polyurethane rigid foam can be ignited by open flame, but it is not easy to burn. Even if it burns, it is only surface coking instead of being burned.
6、节约资源建筑外墙传统做法需大量使用水泥、砂子、水及其它材料,资源十分浪费,拆除后垃圾很多。
6, the traditional way of saving resources and building exterior walls needs a lot of cement, sand, water and other materials. The resources are very wasteful, and there is a lot of rubbish after demolition.