运送铝板、铝卷资料应留意哪些？
What should we pay attention to when transporting the information of aluminium sheet and coil?
铝卷能够进行整卷的包装分成小卷来进行运送，较好衬纸芯或许铝芯的防止铝卷在运送的过程中变形，铝板在装车时要留意安稳性，防止铝板磕碰等。
Aluminum roll can be packed into small rolls for transportation. It is better to prevent the deformation of the roll by lining paper core or aluminium core. Aluminum sheet should pay attention to its stability during loading and prevent the collision of aluminium sheet.
铝板、铝卷耐腐蚀，如果在运送过程中被淋雨的话，或许就导致了外表均匀腐蚀，影响运用过程中的外观，所以在铝板、铝带、压花铝板等在运送过程中一定要做到防潮防雨。
Aluminum sheets and coils are corrosion-resistant. If they are rained during transportation, they may cause uniform corrosion on the surface and affect the appearance of the application process. Therefore, moisture-proof and rain-proof must be achieved in the transportation process of aluminum sheets, aluminum strips and embossed aluminum sheets.
防腐蚀性液体不能够和湿润、油品、化工原料等资料进行混装，防止发生部分或腐蚀，使铝板或铝材报废。铝板的硬度一般较低，所以在运送过程中也要做好防磕碰作业，尤其是铝箔更容易发生碰伤，磕伤的情况，在装卸货、转运的时候一定要做好防护作业，包含吊具应运用软带和旅伴接触的地方应运用护角等，这样才能保证货品的安全抵达。
Anticorrosive liquids can not be mixed with wetting, oil, chemical raw materials and other information to prevent partial or corrosion, so that aluminum sheets or aluminum scrap. Aluminum plate hardness is generally low, so in the process of transportation also need to do a good job of anti-knock operation, especially aluminum foil is more likely to occur collision, knock injury situation, in loading, unloading, transshipment must do a good job of protection operations, including lifting gear should use soft belt and travel companion contact should use corner protection, so as to ensure the safe arrival of goods.

铝板运送途中的丢失，不外乎以下几点：
The loss of aluminium sheets in transit is nothing more than the following:
一，碰伤、进水氧化、划伤。不合理的装车是形成丢失的主要原因。铝板装车时，一定要把铝板装安稳固定好，不要放在其他货品上面，要放在车厢较下面；
First, bruises, water oxidation, scratches. Unreasonable loading is the main cause of loss. Aluminum plate loading, must be installed in a stable fixed, do not put on other goods, should be placed at the bottom of the carriage;
第二，铝板可层次堆放，但不要过高，不要超过3-4层为宜；
Secondly, the aluminium sheet can be stacked in layers, but not too high. It is advisable not to exceed 3-4 layers.
第三，车厢内其他货品要进行加固，防止行车途中磕碰铝板；较终，铝板上面要加盖防水布，防止因为雨、雪等天气原因形成铝板丢失。
Thirdly, other goods in the carriage should be reinforced to prevent bumping into the aluminium plate while driving; finally, the aluminium plate should be covered with waterproof cloth to prevent the loss of aluminium plate due to weather factors such as rain and snow.
以上信息是我们铝板生产厂家整理发布希望对大家有所帮助我们的网站是：http://www.jndclyyxgs.com!
The above information is our aluminium plate manufacturer's collation and publication hope to help you with our website is: http://www.jndclyyxgs.com!